1.2 Interfaces Overview
Introduction to the enclosure and outside physical interfaces of the outdoor router.
Interfaces
Introduction to the outside physical interfaces of the outdoor 4G router.
EZR34T-LTE router has 4x antenna sockets, 1x gland socket, 1x breather valve, and 1x lock hole.
All of the antenna sockets are N-female type. 4G antenna sockets are on the top side, and Wi-Fi antenna sockets are on the bottom.
[1~6] are the embossed numbers on the enclosure. [2] The top side is for spare uses.
There are two types of ends on the T-shape wrench. The hexagon end fits the hexagon bolts on the lid. The cross end is fit to cross-headed screws on the backside. Use one of the Hexagon ends on the wrench and turn in an anti-clockwise direction to lose the bolts on the lid. Then, we can open the enclosure.
Seal the Enclosure
Close the lid & press it with your hand. Then, use the hexagon end on the T-wrench to tighten four pieces of bolts on the lid. After closing the enclosure, please review and ensure no gap after tightening the screws!
Last updated
